| picture | description |
 | BSO -VHF/W 100-180 MHz The wideband omnidirectional antenna with no tuning required. The antenna covers whole air VHF band. The antenna is designed for vertical polarization, resistant to effect of walls and metal parts of mounting construction, DC-grounded. In lower locations the antenna doesn’t require an additional lightning protection. download PDF |
 | BSA VHF 118-136 MHz The wideband omnidirectional antenna, with no tuning required. The antenna is designed for vertical polarization, resistant to effect of walls and metal parts of mounting construction, DC-grounded. In lower locations doesn’t require additional lightning protection. As opposed to BSO-VHF/W, it has reinforced construction with fiberglass cover. The radiation element has a different construction. Structural changes enable applications in more responsible radio systems. download PDF |
 | BASE STATION ANTENNA BSG VHF 150/A 116-144MHz The wideband dipole type antenna with reflector forming radiation pattern. An aluminium welded construction is covered with a powder varnish ensuring resistance to climatic conditions. A small active surface ensures resistance to ice and wind in all environments. A handle on a back side of antenna enables easy mounting direct at mast as a single antenna or in antenna arrays using toehold. Considering a high emission power the antenna is recommended to application in broadcasting centers. Folded-out construction optimizes costs of transport and storing. download PDF |
 | BASE STATION ANTENNA BSG VHF 130/MG 116-145 MHz The wideband dipole type antenna with reflector forming radiation pattern. In common-phase antenna arrays the BSG 130/MG enables form horizontal radiation pattern. An aluminium welded construction is covered with a powder varnish ensuring resistance to climatic conditions. A small active surface ensures resistance to ice and wind in all environments. A handle on a back side of antenna enables easy mounting direct at mast as a single antenna or in antenna arrays using toehold. Considering a high emission power the antenna is recommended to application in broadcasting centers. The BSG 130/MG is designed to work in arrays of 2 or 4 antennas that ensure omni-directional radiation pattern. Folded-out construction optimize costs of transport and storing. download PDF |
 | BASE STATION ANTENNA BSG/S2 150 VHF 116-146MHz / 144-175MHz / 174-210MHz / 200-245MHz Dipole antenna in a vertical array with gain optimization in the elevation plane. In syn-phase systems, it enables the shaping of horizontal radiation characteristics in the range of 140 – 360 degrees. The welded aluminum structure is covered with a powder varnish which provides high resistance to atmospheric corrosion. The small active area ensures resistance to ice and wind in all weather conditions. The design of the antenna enables convenient installation directly on the masts as a single antenna, or in antenna systems using a springboard. High admission power predisposes the antenna to be used in transmitting centers. The design (116-146MHz) enables the construction of omnidirectional or directional aviation communication systems. Gain 3 dB, height 2.75 m. download PDF |
 | BASE STATION ANTENNA BSG UHF 400 220-400 MHz The wideband dipole type antenna with reflector forming radiation pattern. The antenna is produced in version covering the whole UHF air band. An aluminium welded construction is covered with a powder varnish ensuring resistance to climatic conditions. The cover of dipole is made of fiberglass laminate. A handle on a back side of antenna enables easy mounting direct at mast as a single antenna or in antenna arrays using toehold. Considering a high emission power the antenna is recommended to application in broadcasting centers. The BSG UHF (220-400 MHz) enables create omniderectional or directional ACC FIS air communication systems. Folded-out construction optimizes costs of transport and storing. download PDF |
 | NEW BASE STATION ANTENNA BSG/S2 UHF 205-415MHz Vertical array dipole antenna. Produced for civil and military applications. In syn-phase systems, it enables the shaping of horizontal radiation characteristics in the range of 140 – 360 degrees. Welded aluminum structure, radiating elements protected by shields made of epoxy-glass laminate. The small active surface provides resistance to ice and wind, enabling use in all weather conditions. The design of the antenna enables convenient installation directly on the masts as a single antenna, or in antenna systems using a springboard. High admission power predisposes the antenna to be used in transmitting centers. The BSG / S2 UHF antenna covers the 225-400 MHz band and can be used in the construction of aviation communication systems. Manufactured with an N or 7/16 coaxial connector in the following colors: white and olive green. Gain 3 dB, height 1.63 m. download PDF |
 | NEW BSW 116-400 VHF / UHF antenna system 116-146MHz / 220-405MHz Antenna system covering the VHF and UHF aviation bands. Manufactured on the basis of BSG / S2VHF and BSG / S2 UHF antennas. Mounted on vertical masts by means of a springboard, it provides an omnidirectional radiation pattern with unevenness depending on the dimensions of the mast cross-section and the place of attachment (length of the springboard). Supplied with a chamfer system to optimize gain in the elevation plane and alignment for a low SWR. Equipped with an N or 7/16 coaxial socket. The small active surface provides resistance to ice and wind, enabling use in all weather conditions. The BSW116-400VHF / UHF antenna system covers the 116-146 and 225-400 MHz bands, so it can be used with the last Resort VHF / UHF radio stations. Produced in colors: white or olive green. Gain 3 dB, height 7.57 m. download PDF |
 | VDMA 400 118-400 MHz The wideband discone type antenna made of welded duraluminium and covered with powder varnish. A very wide range of operating 100 – 500MHz is giving the posibility of applaying in many terrestrial, air and naval applications. Considering of the omnidirectional radiation pattern it is one of the most universal antennas. The antenna was measured in the Institute of Telecommunications and Acoustics of Wrocław University of Technology. The antenna is DC-grounded. download PDF |
 | ATC ML 100 108-118 MHz The antenna operating in the monitoring systems of ILS devices. The antenna is made ofheavy duty aluminum. All aluminium elements are welded. The antenna is painted with powder varnish, which protects the conductor from an influece of climatic conditions. All metal parts are DC-grounded. download PDF |
 | ATC ML 300 328-336 MHz The antenna operating in the monitoring systems of ILS devices. Radiators and reflectorscreen are made of heavy duty aluminum. The antenna is enclosed in a fiberglass radome. The impact resistant radome keeps the electrical characteristics even under heaviest icing. Waterproof construction and careful material selection ensure long dependable service in all environments. All metal parts are DC-grounded. download PDF |
  | ATC S03 118-136 MHz / 220-400 MHz Integrated antenna system consisting of 2 or 3 independent sections operating in the band 118 – 136MHz and/or 220 – 400MHz. The ATC-S03 is produced in VHF, UHF and VHF/UHF versions. A resistant construction protects radiation elements from the influence of environment. There is a low intensity LED obstruction light of type B with own power supply and a crepuscular switch on the top of antenna. The construction has internal grounding along the entire length of antenna. In the bottom part there are connectors for grounding, feeding lines and power supply. The antenna is dedicated for air radiocommunication systems. download PDF |
  | ATC S05 118-136 MHz / 220-400 MHz Integrated antenna system consisting of 4 independent sections operating in the band 118 – 136MHz and/or 220 – 400MHz. An internal structure is optimized with a special consideration of minimum crosstalks. There is a low intensity LED obstruction light of type B with own power supply and a crepuscular switch on the top of antenna. The construction has internal grounding along the entire length of antenna. In the bottom part there are connectors for grounding, feeding lines and power supply. The antenna is dedicated for air radiocommunication systems. download PDF |
 | ATC-S05 / H antenna system 116-140 MHz / 200-400 MHz The ATC S 05 / H antenna system is a development version of the ATC S05 system. The modernization consisted in equipping the radio part with a control and protection module for the proper operation of all system systems. The type of antenna sections has also been changed from the so-called coaxial dipoles on collinear discon antennas. The power supply and lightning protection systems were modified, which significantly standardized the vertical radiation pattern and increased the separation between adjacent sections of antenna radiators. These changes contributed to the improvement of the antenna’s transmission parameters, which directly translates into the operating range of the radio. A new method of earthing the radiators was also introduced, which, combined with a more effective lightning protection system, significantly increased the degree of protection of communication equipment against damage from lightning discharges. Gain 0 dB, height 5 m. download PDF |
 | ATC S08 960-1215 MHz Antenna consists of 8 half-wave dipoles, phase-feeding lines, red dualobstruction lights, and lighting protection system. The horizontal pattern is obtained by omnidirectional radiation pattern of each dipole, the vertical pattern is realized by right feeding and location of radiation elements. Monitor probes are located inside the fiberglass radome being supporting structure of the antenna. All feedlines additional are located inside the brass tube. Antenna is designed for ground – to – air D.M.E. systems, for the frequency range 960-1215MHz. download PDF |
| ATC S08H 960-1215 MHz Antenna consists of 10 half-wave dipoles, phase-feeding lines, red dualobstruction lights, and lighting protection system. The horizontal pattern is obtained by omnidirectional radiation pattern of each dipole, the vertical pattern is realized by right feeding and location of radiation elements. Monitor probes are located inside the fiberglass radome being supporting structure of the antenna. All feedlines additional are located inside the brass tube. Antenna is designed for ground – to – air D.M.E. systems, for the frequency range 960-1215MHz. download PDF |
 | ATC S08W 116-150 MHz / 100–165 MHz The omnidirectional antenna designed for vertical polarization, producedin versions covering the whole VHF and UHF band. The antenna includes two phased dipoles and a wideband transformer which ensures the matching in the whole VHF band. All is closed in a heavy-duty fiberglass radome. The antenna is DC-grounded and a lightning rode placed on the top enables applying the antenna as an element crowning the mast. An application: civil and military terrestrial and air communication systems. download PDF |
 | ATC S09 100-165 MHz The omnidirectional antenna designed for vertical polarization, produced in versions covering the whole VHF and UHF band. Waterproof construction and careful material selection ensure resistance to climatic conditions irrespective of climatic zones. The construction of the antenna is optimized with a special consideration of a required impedance matching in the neighbourhood of other antennas or of the structure of masts. The antenna is DC-grounded, there is an earthing clamp on the corpus of the antenna. An application: civil and military terrestrial and air communication systems. download PDF |
| NEW ATC S09S 116-144 MHz The omnidirectional antenna, vertically polarized, produced in versions covering the entire VHF and UHF bands. Tight construction and selection of materials make the product resistant to environmental factors, regardless of the climatic zones of the location. The design of the antenna is optimized to ensure the required impedance matching in the vicinity of other antennas or mast structures. The antenna is DC-grounded, a grounding clamp is placed on the mounting body. Application: civil and military land and air communication systems. Gain 0 dB, length 1.95 m. download PDF |
 | NEW ATC S09M 116-144 MHz The omnidirectional antenna designed for vertical polarization, producedin versions covering the whole air communication VHF band. Waterproof construction and careful material selection ensure resistance to climatic conditions irrespective of climatic zones. The construction of the antenna is optimized with a special consideration of a required impedance matching in the neighbourhood of other antennas or of the structure of masts. The antenna is DC-grounded, there is an earthing clamp on the corpus of the antenna and lightning rod on the top. An application: civil and military terrestrial and air communication systems, mobile command center. download PDF |
 | ATC S10 220-410 MHz The omnidirectional antenna designed for vertical polarization,produced in versions covering the whole UHF band. Waterproof construction and careful material selection ensure resistance to climatic conditions irrespective of climatic zones. The construction of the antenna is optimized with a special consideration of a required impedance matching in the neighbourhood of other antennas or of the structure of masts. The antenna is DC-grounded, there is an earthing clamp on the corpus of the antenna. An application: civil and military terrestrial and air communication systems. download PDF |
 | ATC S11 GS 328-336 MHz The antenna is made as an array of dipoles with a reflector shaping a radiation pattern providing parameters of ILS path. Radiating elements are secured by a fiberglass laminate cover, in which the heating system is installed. The heating system is stabilized by its own power supply with thermostat. The structure is made of lightweight aluminium alloy, welded and powder painted. The phasing system is made of coaxial cables which are resistant to change of parameters during the entire period of operation. In the back of the antenna, near the input, the monitor signal output is placed for the continuous monitoring of the ILS system. download PDF |
 | ATC S12 VHF 116-136 MHz Wideband dipole antenna type with a circuit for shaping a match factor.The ATC S12 antenna covers the avionic VHF band 116-136 MHz. In common-phase systems the ATC S12 enables build the antenna array with a gain to 6dB and omniderectional radiation pattern in the azimuth plane. Duraluminium welded construction is covered with a powder varnish providing a high resistance to atmospheric corrosion. A small active surface ensures resistance to ice and wind in all environments. A handle on a back side of antenna enables easy mounting direct at the mast as a single antenna or in antenna arrays using toehold. Considering a high emission power the antenna is recommended to application in broadcasting centers. The antenna is supplied with a fiberglass mast length of 3 meters, ensuring an omnidirectional radiation pattern. In this case a grounding cable is located along the mounting mast. The antenna is DC-grounded and with proper grounding does not require an additional lightning rod. download PDF |
 | ATC S14 VHF 118-136 MHz The omnidirectional antenna designed to operation in the vertical polarization in the VHF band. The antenna includes a half wave dipole with elements to optimize the matching. The ATC S14 is DC-grounded and ensures draining of electrostatic charges, a lightning rod placed on the top allows installation without an additional lightning protection. Application: civil and military systems for terrestrial and aviation communications. download PDF |
 | The antenna is designed for cooperate with ADS-B receivers, IFFsystems and other radio navigation systems operating in a band of 1000- 1200 MHz. The antenna can be mounted on a typical diameter masts. Waterproof construction ensures long dependable service in all environments. The antenna is DC-grounded and requires additional lightning rod only in peak locations. download PDF |
 | ATC S16 UHF 210-410 MHz The omnidirectional antenna designed for vertical polarization, produced in versions covering the whole UHF band. The antenna has a very high resistance to environmental factors, mechanical damage and lightning. The antenna is designed and optimized to provide the required matching impedance close to other antennas or masts. The antenna is DC-grounded, there is a lightning rod on the top, connected with an earthing clamp on the base of the antenna. The antenna requires no additional lightning rod in peak locations. An application: civil and military terrestrial and air communication systems. ATC S16 – download PDF ATC S16 F – download PDF |
 | ATC S17 SSR 900-1400 MHz The antenna is designed for an aviation application and for mounting on a propeller-driven aircraft. Construction allows mounting on the hull bottom of the aircraft. Radiation pattern is shaped for cooperation with transponders of SSR or TCAS system. download PDF |
 | ATC S18 1000-1100 MHz The antenna is designed for cooperate with ADS-B receivers operating in a band of 1000 – 1100 MHz. The antenna can be mounted on a typical diameter masts. Waterproof construction ensures long dependable service in all environments. The antenna is DC-grounded and requires additional lightning rod only in peak locations. It is recommended to be installed in urban areas with totally or partially unobscured horizon. Performed in two versions, 8.5 and 10 dBi. download PDF |
 | ATC S20 1020-1100 MHz The antenna is designed for cooperate with the ADS-B receivers. The constructions enables to use the antenna in local broadcasting systems cooperating with aviation transponders. The antenna can be mounted on a typical diameter masts. Waterproof construction ensures long dependable service in all environments. The cover is made of fiberblass laminate and painted with varnish which is resistance to UV. The antenna is DC-grounded and requires additional lightning rod only in peak locations. download PDF |
 | ATC S22M 116-144 / 220-400 MHz Wideband antenna system ATC S-22M The omnidirectional wideband antenna designed for cooperation with VHF/UHF radio stations. Waterproof construction and careful material selection ensure resistance to climatic conditions irrespective of climatic zones. The antenna is DC-grounded, there is an earthing clamp on the corpus of the antenna and lightning rod on the top. Independent VHF and UHF outputs allow direct connection to radio with separate bands. Connection to radio with a single VHF/UHF output can be realized via DUV-300 duplexer. An application: civil and military terrestrial and air communication systems, mobile command center. download PDF |
 | AT-DVOR 011 106-120 MHz The antenna is designed for VOR/DVOR air navigations systems as a carrier and a sideband antenna. It is an Alford loop antenna with a balun, enclosed in a fiberglass radome. The rigid mechanical construction ensures a stability of transmission parameters regardless of the weather and season. The mounting corps of the AT-DVOR 011 cooperate with a standard support used in DVOR beacons. The antenna has an input for a probe. The removeable radome allows to tune the antenna for an operating frequency of the beacon. download PDF |